Recommended Drive Rebuilds for Vibratory Conveying Equipment
Drive rebuilds and replacement parts are available for all of your Triple/S Dynamics equipment – vibratory conveyors, density separation, and screening equipment lines. The typical sequence of inspected items once a drive is sent to our shop for inspection and/or rebuild: bearings, seals, sight glass, breather, belts, gears, weight stack hardware, visible oil/grease leaks, level in x and y, and inspection of the shafts.
Click on the links below to jump to a desired section:
Category 1 Rebuild Kit Recommended Every Year
To keep maintenance on track, start with a top-to-bottom audit of your Triple/S Dynamics equipment. Our recommended Category 1 preventative maintenance plan includes the following:
- Bearings
- Seals (Inner & Outer)
- Speedi Sleeves
- Shaft Retainers
- Support Washers
- Bolts (Bearing Housing)
- Nuts (Bearing Housing)
- Washers (Bearing Housing)
- Sight Gauge (Gear Case)
- Breather Assembly (Gear Case)
- Gasket (Gear Case)
Category 2 Rebuild Kit Recommended Every 3-5 Years
The partial drive rebuild program can provide longer life without having to purchase a completely new unit. The partial rebuild includes everything from preventative maintenance, along with the following:
- Everything from Category 1
- Shaft
- Drive
- Shaft(s)
- Driven
- Seal Retainer
- Inner (Gear Side)
- Seal Retainer
- Inner (Drive Side)
Category 3 Rebuild Kit Recommended Every 5-10 Years
A 12- year – old drive arrives in our Dallas shop for inspection and possible rebuild.
Before Rebuild
After Rebuild
Click on the before and after images above to see the full image gallery.
We have a checklist/teardown list and will provide you with a detailed cost to rebuild your unit, which could save as much as 40% of the cost of a new drive. In the case that a full rebuild is required, everything from Preventative Maintenance & Partial Rebuild will be recommended, along with the following items:
- Everything from Categories 1 & 2
- Gear Assembly
- Bearing House (Gear Side)
- Bearing House (Drive Side)
Full Rebuild 10+ Years
The drive rebuild program can provide longer life without having to purchase a completely new unit. You can return your drive unit to our Dallas shop and we will perform a complete tear-down and inspection of the drive. Or you can have one of our technicians come to your facility and perform the inspection and rebuild. After the inspection, we will provide you a detailed quote for the cost of the rebuild.